Responsive Menu
Add more content here...
Responsive Menu
Add more content here...

7″ x 42″ Select & Better Unfinished White Oak Engineered Herringbone Flooring

$10.69 sq. ft.

Product Price
$

Description

Are you looking for a White Oak Herringbone Hardwood floor? You have come to the right place! We offer Engineered Herringbone with a 4mm Wear Layer. Each of these Unfinished Select & Better boards are 5/8″ thick and 7″ wide. This wood is manufactured in the USA to be 42″ long with Double End Groove milling.

Additional information

Weight 3.0 lbs
Min order bundle(s) / carton(s)

10

Square Feet Per Bundle / cartons

20

Width

7"

Thickness

5/8"

Length

42"

Install Method

Glue, Nail, or Staple

Milling Profile

Herringbone

Finish

Unfinished

Grade

Select & Better

Wood Specie

White Oak

Construction Type

Engineered Hardwood Flooring

Country Of Origin

Made in USA

Janka Hardness Rating

1360

Lead Time

Please Allow 3 – 4 Weeks for Manufacturing

Wear Layer Thickness

4mm Wear Layer

Model

SELENGUFWOHB7X42

Edge Profile

Square Edges & Ends

Reviews

There are no reviews yet.

Be the first to review “7″ x 42″ Select & Better Unfinished White Oak Engineered Herringbone Flooring”

Unfinished White Oak Moldings & Transition Strips

Name Description
Unfinished White Oak Baby Threshold
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness.
$21.00Buy Now
Unfinished White Oak Stair Nosing - 5/8" x 3 1/2"
$68.50Buy Now
Unfinished White Oak Shoe Molding
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc...

This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round.

$8.60Buy Now
Unfinished White Oak T Molding
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold.
$19.50Buy Now
Unfinished White Oak Quarter Round Molding
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc...

Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding.

$9.80Buy Now
Unfinished White Oak Reducer Strip - 3/4"
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc...

This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long.

$18.90Buy Now
Unfinished White Oak Stair Nosing - 5/8" x 5 1/2"
$85.90Buy Now

Uncategorized

Name Description
Unfinished White Oak Cove Molding (Scotia)
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase.

This type of trim is also referred to as Scotia.

$11.20Buy Now
X
7″ x 42″ Select & Better Unfinished White Oak Engineered Herringbone Flooring
$10.69 sq. ft.