7″ x 28″ Select & Better Rift & Quartered White Oak Chevron Flooring
Description
Take a look at this 3/4″ x 7″ Solid Rift & Quarter Sawn White Oak Chevron Hardwood. This Unfinished Select & Better product has a 45 degree miter. Each plank is 28 Inches long with Double End Groove milling.
Additional information
Weight | 3.00 lbs |
---|---|
Min order bundle(s) / carton(s) | 10 |
Square Feet Per Bundle / cartons | 20 |
Width | 7" |
Thickness | 3/4" |
Length | 28" |
Finish | Unfinished |
Grade | Select & Better |
Wood Specie | White Oak |
Construction Type | Solid Hardwood Flooring |
Janka Hardness Rating | 1360 |
Other Special Features | Rift & Quarter Sawn |
Special Features | 45 Degree Mitered Ends |
Model | 7UFSELRQWOCHEV28 |
Edge Profile | Square Edges & Ends |
Be the first to review “7″ x 28″ Select & Better Rift & Quartered White Oak Chevron Flooring” Cancel reply
Uncategorized
Name | Description | |
---|---|---|
Unfinished Rift & Quarter Sawn White Oak Baby Threshold
|
$47.20Buy Now | |
Unfinished Rift & Quarter Sawn White Oak T Molding
|
78" Long and 2" Wide - Use this Unfinished Rift & Quartered White Oak T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $52.50Buy Now |
Unfinished White Oak Moldings & Transition Strips
Name | Description | |
---|---|---|
Unfinished Rift & Quarter Sawn White Oak Baby Threshold
|
$47.20Buy Now | |
Unfinished Rift & Quarter Sawn White Oak Stair Nosing - 3/4" x 5 1/2"
|
$119.50Buy Now | |
Unfinished Rift & Quarter Sawn White Oak Stair Nosing - 3/4" x 3 1/2"
|
$84.90Buy Now | |
Unfinished Rift & Quarter Sawn White Oak Shoe Molding
|
$26.00Buy Now | |
Unfinished Rift & Quarter Sawn White Oak T Molding
|
78" Long and 2" Wide - Use this Unfinished Rift & Quartered White Oak T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. | $52.50Buy Now |
Unfinished Rift & Quarter Sawn White Oak Cove Molding (Scotia)
|
$31.00Buy Now | |
Unfinished Rift & Quarter Sawn White Oak Reducer Strip - 3/4"
|
$43.40Buy Now | |
Unfinished Rift & Quarter Sawn White Oak Quarter Round Molding
|
$27.50Buy Now |
Reviews
There are no reviews yet.