7″ Select & Better Unfinished Solid White Oak Flooring
$5.99 sq. ft.
Description
3/4 Inch x 7 Inch x Random Lengths up to 7 Feet – Unfinished Solid Select &Â Better White Oak Hardwood Flooring
This premium white oak flooring is 3/4″ solid construction in a Select &Â Better grade with beautiful grain that is consistent and clear.
If your project calls for a uniform color and a clean grain, this Select &Â Better white oak flooring is for you.
Each plank measures 3/4 inch thick, 7 inches wide and lengths range from 1 to 7 feet long.
If this isn’t exactly what you’re looking for, you can also browse other 7 Inch Unfinished Solid White Oak Flooring products that are available in other grades or longer lengths. Or if you are looking for a different size other than 7 inch, visit our Unfinished Solid White Oak Flooring page.
Additional information
Weight | 3.5 lbs |
---|---|
Min order bundle(s) / carton(s) | 8 |
Square Feet Per Bundle / cartons | 18.67 |
Width | 7" |
Thickness | 3/4" |
Length | Random Lengths from 1 to 7 Feet |
Install Method | Nail Down or Staple Down |
Milling Profile | Tongue & Groove |
Finish | Unfinished |
Grade | Select & Better |
Wood Specie | White Oak |
Construction Type | Solid Hardwood Flooring |
Country Of Origin | Made in USA |
Janka Hardness Rating | 1360 |
Minimum Length | 12" |
Maximum Length | 84" |
Model | 7SELWO |
Edge Profile | Square Edges & Ends |
Unfinished White Oak Moldings & Transition Strips
Name | Description | |
---|---|---|
Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. |
$9.80Buy Now |
Unfinished White Oak Stair Nosing - 3/4" x 3 1/2"
|
94" Long and 3 1/2" Wide for use with 3/4" Thick Flooring - Use this 3 1/2" Wide Unfinished White Oak Stair Nosing on steps and any other place where your hardwood will approach the edge of a step up or a step down. The front nose is 1 Inch thick, and features a bullnose (half round) all the way across the front. The opposite side of the stair nosing has a groove to receive the tongue of your hardwood flooring. |
$44.60Buy Now |
Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. |
$8.60Buy Now |
Unfinished White Oak Stair Nosing - 3/4" x 5 1/2"
|
This 94" long Stair Nosing has a Bullnose end and is 5 1/2" wide. The Bullnose is 1 Inch thick on the front. This piece is a great way to transition from your staircase to a landing, step down, or step up. Each of these Transitions have a receiving end to fit with most 3/4" thick hardwood floors. | $57.60Buy Now |
Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. |
$19.50Buy Now |
Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. |
$21.00Buy Now |
Unfinished White Oak Reducer Strip - 3/4"
|
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc... This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long. |
$18.90Buy Now |
Underlayment & Padding
Name | Description | |
---|---|---|
Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Uncategorized
Name | Description | |
---|---|---|
Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. |
$11.20Buy Now |
Reviews
There are no reviews yet.