3/4″ x 7″ x 1′ to 10′ RL Unfinished Solid #1 Common White Oak Flooring
$5.09 sq. ft.
Description
As a #1 Common grade floor, this solid White Oak hardwood will exhibit naturally occurring features such as small tight knots, mineral marks, and contrasting colors of both heartwood and sapwood. This grade is a little bit more casual than select, without being rustic.
Planks are made of 3/4″ solid hardwood with tongue & groove milling. The bottoms of the boards have relief grooves milled into them to enhance the structural integrity of the product. This is traditional hardwood flooring so it is installed using traditional hardwood flooring installation methods and tools.
Each plank is 6″ wide, and lengths are random from 1 to 10 feet long.
Additional information
Weight | 3.5 lbs |
---|---|
Min order bundle(s) / carton(s) | 7 |
Square Feet Per Bundle / cartons | 28 |
Width | 7" |
Thickness | 3/4" |
Length | Random Lengths from 1 to 7 Feet |
Install Method | Nail Down or Staple Down |
Milling Profile | Tongue & Groove |
Finish | Unfinished |
Grade | #1 Common |
Wood Specie | White Oak |
Construction Type | Solid Hardwood Flooring |
Country Of Origin | Made in USA |
Janka Hardness Rating | 1360 |
Minimum Length | 12" |
Maximum Length | 84" |
Production Time | Usually In Stock – Call to Check |
Lead Time | Stock Item |
Pattern | Random Lengths |
Model | 71COMWO |
Edge Profile | Square Edges & Ends |
Unfinished White Oak Moldings & Transition Strips
Name | Description | |
---|---|---|
Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. |
$19.50Buy Now |
Unfinished White Oak Reducer Strip - 3/4"
|
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc... This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long. |
$18.90Buy Now |
Unfinished White Oak Stair Nosing - 3/4" x 3 1/2"
|
94" Long and 3 1/2" Wide for use with 3/4" Thick Flooring - Use this 3 1/2" Wide Unfinished White Oak Stair Nosing on steps and any other place where your hardwood will approach the edge of a step up or a step down. The front nose is 1 Inch thick, and features a bullnose (half round) all the way across the front. The opposite side of the stair nosing has a groove to receive the tongue of your hardwood flooring. |
$44.60Buy Now |
Unfinished White Oak Stair Nosing - 3/4" x 5 1/2"
|
This 94" long Stair Nosing has a Bullnose end and is 5 1/2" wide. The Bullnose is 1 Inch thick on the front. This piece is a great way to transition from your staircase to a landing, step down, or step up. Each of these Transitions have a receiving end to fit with most 3/4" thick hardwood floors. | $57.60Buy Now |
Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. |
$8.60Buy Now |
Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. |
$21.00Buy Now |
Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. |
$9.80Buy Now |
Underlayment & Padding
Name | Description | |
---|---|---|
Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Uncategorized
Name | Description | |
---|---|---|
Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. |
$11.20Buy Now |
Reviews
There are no reviews yet.