5/8″ x 8″ x 2′ – 10′ RL Unfinished Engineered Select & Better White Oak with 4mm Wear Layer
$7.69 sq. ft.
Description
This unfinished engineered hardwood flooring is Made in the USA. A solid 4mm wear layer looks identical to a solid hardwood floor, since it is cut the same way, from the same hardwoods. Each plank measures 5/8 inch overall thickness, 8 inches wide, and lengths are random from 2 to 10 feet long.
Since this flooring is unfinished, you have the opportunity to stain and finish it to your liking at your jobsite.
Additional information
Weight | 2.75 lbs |
---|---|
Min order bundle(s) / carton(s) | 15 |
Square Feet Per Bundle / cartons | 20 |
Width | 8" |
Thickness | 5/8" |
Length | Random Lengths from 2 to 10 Feet |
Install Method | Glue, Nail, or Staple |
Milling Profile | Tongue & Groove |
Finish | Unfinished |
Grade | Select & Better |
Wood Specie | White Oak |
Construction Type | Engineered Hardwood Flooring |
Country Of Origin | Made in USA |
Janka Hardness Rating | 1360 |
Minimum Length | 24" |
Maximum Length | 120" |
Other Special Features | Thick Wear Layer |
Special Features | Long Lengths |
Wear Layer Thickness | 4mm Wear Layer |
Model | 8SELWOENG582-10 |
Edge Profile | Square Edges & Ends |
Be the first to review “5/8″ x 8″ x 2′ – 10′ RL Unfinished Engineered Select & Better White Oak with 4mm Wear Layer” Cancel reply
Uncategorized
Name | Description | |
---|---|---|
Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. |
$11.20Buy Now |
Unfinished White Oak Moldings & Transition Strips
Name | Description | |
---|---|---|
Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. |
$19.50Buy Now |
Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. |
$21.00Buy Now |
Unfinished White Oak Stair Nosing - 5/8" x 5 1/2"
|
$85.90Buy Now | |
Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. |
$9.80Buy Now |
Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. |
$8.60Buy Now |
Unfinished White Oak Stair Nosing - 5/8" x 3 1/2"
|
$68.50Buy Now |
Underlayment & Padding
Name | Description | |
---|---|---|
Sound Guard Premium Acoustic Underlayment with Moisture Barrier & Self Adhesive Tape
|
100 Square Foot roll of Sound Guard pad, a 3mm thick premium acoustic underlayment for all laminate and floating wood flooring products. This floor padding cannot be beat dollar for dollar compared to all other acoustical underlay material for floating floors. SoundGuard can be used with any floating laminate, floating wood floor, floating bamboo, or floating cork floor. When you buy Sound Guard underlayment you are getting less foot-fall noise at a lower price than with any other floating floor underlayment on the market. And with it's self-adhesive lip and tape, you save time and money during installation, without the need to purchase and apply tape to the seems. Because of it's built-in moisture barrier, SoundGuard does not require the use of any additional moisture barriers to be used in conjunction, such as sheet plastic, visqueen, etc. SoundGuard is a moisture barrier and floating floor underlayment/padding in one! Here are some astounding statistics about Sound Guard from a third-party laboratory: *The highest American-Certified test ratings in both the Impact Insulation Class (IIC) and the Sound Transmission Class (STC). *American IIC Rating = 71 & American STC Rating = 67 *International IIC Rating = 87 & International STC Rating = 83 *Unique Anti-microbial black rubber construction with 100% sealed cell structure *Completely waterproof when the attached self-adhesive lip and tape are used properly 3mm thickness | $69.00Buy Now |
Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Reviews
There are no reviews yet.