5″ x 30″ Select & Better Unfinished Red Oak Engineered Herringbone Flooring
$9.19 sq. ft.
Description
This is the 5/8″ x 5″ Engineered Unfinished Red Oak Herringbone flooring. Each of these planks are 30″ long with a 4mm Wear Layer. This USA made Select & Better wood has Double End Groove milling.
Additional information
| Weight | 3.00 lbs |
|---|---|
| Model | SELENGUFROHB5X30 |
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 5" |
| Thickness | 5/8" |
| Length | 30" |
| Install Method | Glue, Nail, or Staple |
| Milling Profile | Herringbone |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | Red Oak |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Lead Time | Please Allow 3 – 4 Weeks for Manufacturing |
| Wear Layer Thickness | 4mm Wear Layer |
| Edge Profile | Square Edges & Ends |
Be the first to review “5″ x 30″ Select & Better Unfinished Red Oak Engineered Herringbone Flooring”
Unfinished Red Oak Transition Strips & Moldings
| Name | Description | |
|---|---|---|
 Unfinished Red Oak Quarter Round
|
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Quarter Round molding can be used where your red oak flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces. Each 8 foot long piece of unfinished red oak quarter round is made from a single piece of solid red oak hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide. | $11.50Buy Now |
 Unfinished Red Oak Baby Threshold
|
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood. | $33.50Buy Now |
 Unfinished Red Oak T Molding
|
94" Long and 2" Wide - Use this Red Oak T-Molding wherever your oak flooring meets up to another hardwood floor, or any other hard-surface flooring of the same height/thickness. In other words, use a T Molding to transition between two hard-surface floors that meet up to each other evenly. Each piece of this unfinished red oak T Mold transition strip is 8 feet long. You can stain this red oak t-mold any color you want, or you can just finish it natural. | $33.50Buy Now |
 Unfinished Red Oak Shoe Molding
|
1/2" Wide x 3/4" High x 94" Long - This Unfinished Red Oak Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise. This shoe molding is made from solid red oak hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long. Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors. | $9.75Buy Now |
 Unfinished Red Oak Cove Molding (Scotia)
|
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Cove Molding, also called Scotia, is used where the stair riser meets the stair tread to create a complete, professional look in your wooden stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. Our unfinished red oak cove molding, like all of our hardwood moldings, is made from a single piece of solid hardwood. Each piece is 3/4" Wide x 3/4" High x 8'Â Long. | $11.95Buy Now |
Unfinished Engineered Red Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished Red Oak Stair Nosing - 5/8" x 3 1/2"
|
Complete your flooring product with this 3 1/2" x 78" Unfinished Red Oak Stair Nosing. This strips transitions from most 5/8" thick Red Oak Hardwoods to a staircase, step down, or step up. | $54.00Buy Now |
 5/8" Unfinished Red Oak Reducer Strip
|
Use this 78" Unfinished Red Oak Reducer to transition from most 5/8" thick Hardwoods to tile, linoleum, or vinyl. | $49.00Buy Now |
|
Unfinished Red Oak Stair Nosing - 5/8" x 5 1/2"
|
Use this 5 1/2" x 78" Unfinished Red Oak Stair Nosing to transition from most 5/8" thick Red Oak Hardwood floors to a staircase, step down, or step up. | $79.00Buy Now |
Uncategorized
| Name | Description | |
|---|---|---|
|
Unfinished Red Oak Baby Threshold
|
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood. | $33.50Buy Now |
Reviews
There are no reviews yet.