3/4″ x 2 1/4″ #1 Common Walnut
$6.54 sq. ft.
Description
Featured here is our 3/4 x 2 1/4 Inch Unfinished Solid Walnut flooring in a #1 Common Grade. This grade allows some small pin knots and natural color variation, but overall is very clean and has a generous portion of longer boards.
Additional information
Weight | 2.50 lbs |
---|---|
Min order bundle(s) / carton(s) | 6 |
Square Feet Per Bundle / cartons | 15.75 |
Width | 2 1/4" |
Thickness | 3/4" |
Length | Random Lengths from 1 to 7 Feet |
Install Method | Nail Down or Staple Down |
Milling Profile | Tongue & Groove |
Finish | Unfinished |
Grade | #1 Common |
Wood Specie | Walnut |
Construction Type | Solid Hardwood Flooring |
Production Time | Usually In Stock – Call to Check |
Lead Time | Stock Item |
Model | 2141COMWAL |
Be the first to review “3/4″ x 2 1/4″ #1 Common Walnut” Cancel reply
Unfinished Solid Walnut Transition Strips & Moldings
Name | Description | |
---|---|---|
Unfinished Walnut Baby Threshold
|
94" Long and 2" Wide - This Walnut Baby Threshold can be used where your walnut floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations. This unfinished walnut Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid walnut hardwood. |
$69.50Buy Now |
Unfinished Walnut Shoe Molding
|
1/2" Wide x 3/4" High x 94" Long - This Unfinished Walnut Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise. This shoe molding is made from solid walnut hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long. Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors. |
$29.90Buy Now |
Unfinished Walnut T Molding
|
94" Long and 2" Wide - Use this Walnut T-Molding wherever your walnut flooring meets up to another hardwood floor, or any other hard-surface flooring of the same height/thickness. In other words, use a T Molding to transition between two hard-surface floors that meet up to each other evenly. Each piece of this unfinished walnut T Mold transition strip is 8 feet long. You can stain this walnut t-mold any color you want, or you can just finish it natural. |
$66.80Buy Now |
Unfinished Walnut Reducer Strip
|
3/4" Thick x 2 1/4" Wide x 94" Long - Use this Unfinished Walnut Reducer Strip to transition your walnut flooring down to thin floors like vinyl, linoleum, LVT, and other types of very thin flooring materials. All of our walnut transition strips and moldings, including this Reducer Strip, are made from solid hardwood. This unfinished walnut reducer is 3/4" thick at it's highest point, and reduces down to approximately 1/8" at it's narrowest point. The side that is 3/4" thick features a groove that is designed to receive the groove of your hardwood flooring material, or spline that can be used to create a tongue if one is not present at the area where the Reducer is required. |
$67.50Buy Now |
Unfinished Walnut Quarter Round
|
3/4" x 3/4" x 94" Long - This Unfinished Walnut Quarter Round molding can be used where your walnut flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces. Each 8 foot long piece of unfinished walnut quarter round is made from a single piece of solid walnut hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide. |
$36.80Buy Now |
Unfinished Walnut Stair Nosing - 3/4" x 3 1/2"
|
3 1/2" Wide x 78" Long - This Unfinished Walnut Stair Nosing can be used wherever your walnut flooring approaches a step down, such as the edge of a stair landing, loft, and the front of each step of your staircase. This unfinished walnut stair nosing is made up of one single piece of solid hardwood. The stairnosing is 3/4" thick at the back where it meets up to the hardwood flooring, and the front edge is 1 1/16" thick and features a bull-nosed edge all the way across. |
$98.80Buy Now |
Underlayment & Padding
Name | Description | |
---|---|---|
Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
|
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING. |
$89.00Buy Now |
Reviews
There are no reviews yet.