3/4″ x 1 1/2″ Select & Better Unfinished Solid White Oak SHORTS
$4.69 sq. ft.
Description
Here is the 3/4″ x 1 1/2″ Select & Better Red Oak hardwood SHORTS. This Unfinished wood has little to no mineral streaks or knots on the wood because it is a Select & Better Product. This wood delivers in varied lengths of 12 INCHES to 42 INCHES. The only difference between this wood and the normal Tongue & Groove planks is the extra short lengths.
Please do not expect to receive flooring in lengths longer then 42 INCHES.
Additional information
Weight | 2.50 lbs |
---|---|
Min order bundle(s) / carton(s) | 8 |
Square Feet Per Bundle / cartons | 20 |
Width | 1 1/2" |
Thickness | 3/4" |
Length | 12" – 42" |
Install Method | Nail Down or Staple Down |
Milling Profile | Tongue & Groove |
Finish | Unfinished |
Grade | Select & Better |
Wood Specie | White Oak |
Construction Type | Solid Hardwood Flooring |
Country Of Origin | Made in USA |
Janka Hardness Rating | 1360 |
Minimum Length | 12" |
Maximum Length | 42" |
Production Time | In Stock – Ready to Ship |
Lead Time | In Stock – Ready to Ship |
Model | 112SELWOSHORTS |
Edge Profile | Square Edges & Ends |
Be the first to review “3/4″ x 1 1/2″ Select & Better Unfinished Solid White Oak SHORTS” Cancel reply
Unfinished White Oak Moldings & Transition Strips
Name | Description | |
---|---|---|
Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. |
$21.00Buy Now |
Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. |
$19.50Buy Now |
Reviews
There are no reviews yet.