3″ x 18″ Select & Better Unfinished White Oak Engineered Herringbone Flooring
$9.89 sq. ft.
Description
This premium engineered hardwood measures 5/8″ overall thickness, including a generous 4mm thick top layer. Since the wear layer is sawn piece of solid wood, this floor will look identical to a solid wood floor when installed. Each pieces measures 3 inches wide and 18 inches long. Double end groove milling makes for a professional installation experience, and negates the need for “left” and “right” pieces.
Select & Better grade means the wood is free of knots and other naturally occurring imperfections. The 4mm top layer is made from a single piece of solid American White Oak hardwood.
As an unfinished floor, you have the freedom to stain / finish the wood to the color of your liking.
Made in the USA.
Additional information
| Weight | 2.25 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 3" |
| Thickness | 5/8" |
| Length | 18" |
| Install Method | Glue, Nail, or Staple |
| Milling Profile | Tongue & Groove |
| Finish | Unfinished |
| Grade | Select & Better |
| Wood Specie | White Oak |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Pattern | Herringbone |
| Wear Layer Thickness | 4mm Wear Layer |
| Model | SELENGUFWOHB3X18 |
| Edge Profile | Square Edges & Ends |
Be the first to review “3″ x 18″ Select & Better Unfinished White Oak Engineered Herringbone Flooring”
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished White Oak Stair Nosing - 5/8" x 3 1/2"
|
Available in 78 inch long pieces, this unfinished White Oak stair nosing is designed to transition from your staircase to a landing, step down, or step up. This 3 1/2" wide piece has a receiving end to fit with most 5/8" thick Hardwood with Tongue & Groove milling. While this is made from American White Oak, it works great for staining to match many of the European White Oak flooring products on the market that are 5/8 inch thickness. | $62.50Buy Now |
 Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. |
$19.50Buy Now |
 Unfinished White Oak Baby Threshold
|
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. |
$21.00Buy Now |
 Unfinished White Oak Shoe Molding
|
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. |
$8.60Buy Now |
|
Unfinished White Oak Stair Nosing - 5/8" x 5 1/2"
|
5 1/2" wide Unfinished White Oak Stair Nosing is a great way to transition from your staircase to your landing, step down, or step up. The backside of this piece has a receiving end to fit with most 5/8" thick Tongue and Groove Hardwood. | $79.90Buy Now |
 Unfinished White Oak Quarter Round Molding
|
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. |
$9.80Buy Now |
 Unfinished White Oak Reducer Strip - 3/4"
|
94" Long and 2 1/4" Wide - Use this Unfinished White Oak Reducer Strip to transition from your 3/4" thick white oak flooring down to thin floors like vinyl, linoleum, etc... This unfinished white oak reducer strip is 3/4" thick, and tapers down to about 1/8" at it's thinnest point. It is 2 1/4" wide and each piece is 8 feet long. |
$18.90Buy Now |
Uncategorized
| Name | Description | |
|---|---|---|
 Unfinished White Oak Cove Molding (Scotia)
|
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. |
$11.20Buy Now |
Reviews
There are no reviews yet.