2 1/4″ x 9″ Character Engineered White Oak Chevron Flooring
Description
Here is the 5/8″ x 2 1/4″ Unfinished Engineered Chevron Hardwood flooring. Each of these White Oak planks are 9 Inches long with a 45 degree angle milled on each end and with a 4mm Wear Layer. This Character grade wood has Tongue & Groove milling on the sides and Double End Groove milling.
Additional information
| Weight | 3.00 lbs |
|---|---|
| Min order bundle(s) / carton(s) | 10 |
| Square Feet Per Bundle / cartons | 20 |
| Width | 2 1/4" |
| Thickness | 5/8" |
| Length | 9" |
| Finish | Unfinished |
| Grade | Character Grade |
| Wood Specie | White Oak |
| Construction Type | Engineered Hardwood Flooring |
| Country Of Origin | Made in USA |
| Janka Hardness Rating | 1360 |
| Special Features | 45 Degree Mitered Ends |
| Wear Layer Thickness | 4mm Wear Layer |
| Model | 214UFCHARENGWOCHEV9 |
| Edge Profile | Square Edges & Ends |
Be the first to review “2 1/4″ x 9″ Character Engineered White Oak Chevron Flooring”
Unfinished White Oak Moldings & Transition Strips
| Name | Description | |
|---|---|---|
 Unfinished White Oak T Molding
|
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. |
$19.50Buy Now |
 Unfinished White Oak Stair Nosing - 5/8" x 5 1/2"
|
5 1/2" wide Unfinished White Oak Stair Nosing is a great way to transition from your staircase to your landing, step down, or step up. The backside of this piece has a receiving end to fit with most 5/8" thick Tongue and Groove Hardwood. | $79.90Buy Now |
Reviews
There are no reviews yet.