Responsive Menu
Add more content here...
Responsive Menu
Add more content here...

2 1/4″ x 18″ Select & Better Unfinished Walnut Engineered Herringbone Flooring

Call for Price

1-800-689-9006

Description

Here is the 5/8″ x 2 1/4″ Engineered Walnut Herringbone with a 4mm Wear Layer. This Unfinished Select & Better Product is 18″ long and crafted in the USA to had Double End Groove milling.

Additional information

Weight 3.00 lbs
Min order bundle(s) / carton(s)

10

Square Feet Per Bundle / cartons

20

Width

2 1/4"

Thickness

5/8"

Length

18"

Install Method

Glue, Nail, or Staple

Milling Profile

Herringbone

Finish

Unfinished

Grade

Select & Better

Wood Specie

Walnut

Construction Type

Engineered Hardwood Flooring

Country Of Origin

Made in USA

Janka Hardness Rating

1360

Lead Time

Please Allow 3 – 4 Weeks for Manufacturing

Wear Layer Thickness

4mm Wear Layer

Model

SELENGUFWALHB214X18

Edge Profile

Square Edges & Ends

Reviews

There are no reviews yet.

Be the first to review “2 1/4″ x 18″ Select & Better Unfinished Walnut Engineered Herringbone Flooring”

Unfinished Engineered Walnut Transition Strips & Moldings

Name Description
Unfinished Walnut Stair Nosing - 5/8" x 3 1/2"
Here we offer our Unfinished Walnut Stair Nosing. This is used when your Walnut floor meets a step down, such as the edge of a stair landing, loft and on the front of each step on your staircase. This Stair Nosing is 5/8" thick and 3 1/2" x 78". This Stair Nose has a bull-nosed edge all the way across the piece. This wood has a receiving end for the tongue on most Tongue and Grooved flooring. This Walnut Stair Nose coordinates wonderfully with Walnut Flooring.

If you would like an estimated lead time please call 1-800-689-9006.
$0.00Buy Now
Walnut Cove Molding
Do you have a Walnut hardwood Staircase? Take a look at our Walnut Cove Molding to give your staircase a finished appeal. The Cove Molding attached to the underside of the Stair Nose or Tread and the top side of the Riser to create a smooth transition between surfaces. Our Walnut Cove Molding will coordinate perfectly with your Walnut flooring.

For an estimated lead time, please call 1-800-689-9006.
$0.00Buy Now
Unfinished Walnut Stair Nosing - 5/8" x 5 1/2"
This is the 5 1/2" wide and 78" long Unfinished Walnut Stair Nosing with a receiving end to help transition from most 5/8" Hardwood flooring to a staircase, step down, or step up. $0.00Buy Now
5/8" Unfinished Walnut Reducer Strip
Once you install your Walnut hardwood floor you will need something to transition between the new floor and a thinner vinyl, linoleum, LVT, or another type of very thin flooring. This Walnut Reducer is 5/8" thick x 2 1/4" wide x 78" long. This Unfinished Reducer will coordinate perfectly with most Walnut flooring. Even though this is a Solid piece it will coordinate with Solid floor as well has Engineered flooring. 

This piece has a receiving end to fit most Tongues on a Tongue & Groove board.

For an estimated lead time, please call 1-800-689-9006.
$0.00Buy Now

Unfinished Solid Walnut Transition Strips & Moldings

Name Description
Unfinished Walnut Shoe Molding
1/2" Wide x 3/4" High x 94" Long - This Unfinished Walnut Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise.

This shoe molding is made from solid walnut hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long.

Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors.

$29.90Buy Now
Unfinished Walnut Quarter Round
3/4" x 3/4" x 94" Long - This Unfinished Walnut Quarter Round molding can be used where your walnut flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces.

Each 8 foot long piece of unfinished walnut quarter round is made from a single piece of solid walnut hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide.

$36.80Buy Now
X
2 1/4″ x 18″ Select & Better Unfinished Walnut Engineered Herringbone Flooring