Responsive Menu
Add more content here...
Responsive Menu
Add more content here...

10″ x 50″ Select & Better White Oak Chevron Flooring

Call for Price

1-800-689-9006

Description

We offer this 3/4″ x 10″ Solid White Oak Chevron Hardwood with Double End Groove milling. This Select & Better Unfinished 50″ long product has a 45 degree miter on each end.

Additional information

Weight 3.00 lbs
Min order bundle(s) / carton(s)

10

Square Feet Per Bundle / cartons

20

Width

10"

Thickness

3/4"

Length

50"

Finish

Unfinished

Grade

Select & Better

Wood Specie

White Oak

Construction Type

Solid Hardwood Flooring

Country Of Origin

Made in USA

Janka Hardness Rating

1360

Special Features

45 Degree Mitered Ends

Model

10UFSELWOCHEV50

Edge Profile

Square Edges & Ends

Reviews

There are no reviews yet.

Be the first to review “10″ x 50″ Select & Better White Oak Chevron Flooring”

Unfinished White Oak Moldings & Transition Strips

Name Description
Unfinished White Oak T Molding
94" Long and 2" Wide - Use this T-Molding Transition Strip where your hardwood floor meets up to any other hard surface flooring of equal or nearly-equal height. If your hardwood floor is transitioning to another hard surface floor that is 1/4" higher or lower, you should consider a Threshold instead of a T-Mold. $33.25Buy Now
Unfinished White Oak Quarter Round Molding
94" Long and 3/4" Wide and 3/4" High - Use this Unfinished White Oak Quarter Round Molding wherever your hardwood flooring meets up to a vertical surface, such as a wall, baseboard, cabinets, stairway, etc... Each piece of this unfinished white oak quarter round measures 3/4 Inch Wide, 3/4 Inch High, and 94" Long. This is the Full Quarter Round model, NOT the smaller size which should actually be called Shoe Molding. $14.75Buy Now
Unfinished White Oak Shoe Molding
94" Long - Use this Unfinished White Oak Shoe Molding in places where your hardwood flooring runs into a vertical surface, such as a baseboard, kitchen cabinet, built-in furniture, etc... This unfinished white oak shoe molding is 1/2" Wide x 3/4" High x 8 Feet Long. Shoe molding is very similar to Quarter Round, but it is a little bit narrower, therefore it is not quite as bulky as Quarter Round. $13.50Buy Now
Unfinished White Oak Stair Nosing - 3/4" x 5 1/2"
This 94" long Stair Nosing has a Bullnose end and is 5 1/2" wide. The Bullnose is 1 Inch thick on the front. This piece is a great way to transition from your staircase to a landing, step down, or step up. Each of these Transitions have a receiving end to fit with most 3/4" thick hardwood floors. $82.50Buy Now
Unfinished White Oak Stair Nosing - 3/4" x 3 1/2"
94" Long and 3 1/2" Wide for use with 3/4" Thick Flooring - Use this 3 1/2" Wide Unfinished White Oak Stair Nosing on steps and any other place where your hardwood will approach the edge of a step up or a step down. The front nose is 1 Inch thick, and features a bullnose (half round) all the way across the front. The opposite side of the stair nosing has a groove to receive the tongue of your hardwood flooring. $59.00Buy Now
Unfinished White Oak Baby Threshold
94" Long and 2" Wide - Use this White Oak Baby Threshold Transition Strip where your hardwood floor meets up to another floor of a different height/thickness. This Baby Threshold molding can be used to transition from your white oak hardwood to various other types of flooring, including carpet, tile, and even other hardwood flooring of a different thickness. $39.00Buy Now

Uncategorized

Name Description
Unfinished White Oak Cove Molding (Scotia)
3/4 x 3/4 x 94" Long - Use this Cove Molding (A.K.A. Scotia) where the stair riser meets the stair tread to create a complete, professional look in your stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase. This type of trim is also referred to as Scotia. $14.75Buy Now
X
10″ x 50″ Select & Better White Oak Chevron Flooring