Responsive Menu
Add more content here...
Responsive Menu
Add more content here...

3/4″ x 4″ x 2′ – 10′ Random Length Character Red Oak

$3.29 sq. ft.

Product Price
$

Description

This 4″ Wide Plank Red Oak Flooring is more than just Wide Plank Flooring… It’s also Long Plank Flooring, featuring Random Lengths from 2 to 10 Feet Long!

Featured in our Character Grade, this Wide Plank Red Oak flooring is a unique blend of natural character and usability. That means not only does this flooring display nature’s character marks, but at the same time it maintains a low waste factor of only 10%, AND a nice average board length of about 5 feet long!

“Natural Character” means things like mineral streaks (naturally occurring dark streaks in the wood), occasional tight knots, and naturally occurring color variations and grain variations throughout the floor.

This is 3/4″ thick solid wide plank red oak flooring, featuring 4 inch wide planks and extra long lengths from 2 to 10 feet long.

This flooring features Tongue & Groove Milling on all 4 sides, and relief grooves are molded into the bottoms of the planks to allow air-flow, which helps prevent damage from seasonal changes in Relative Humidity.

Additional information

Weight 3.3 lbs
Min order bundle(s) / carton(s)

12

Square Feet Per Bundle / cartons

25.3

Width

4"

Thickness

3/4"

Length

Random Lengths from 2 to 10 Feet

Install Method

Nail Down or Staple Down

Milling Profile

Tongue & Groove

Finish

Unfinished

Grade

Character Grade

Wood Specie

Red Oak

Construction Type

Solid Hardwood Flooring

Country Of Origin

Made in USA

Janka Hardness Rating

1260

Minimum Length

18"

Maximum Length

120"

Special Features

Long Lengths

Production Time

Usually In Stock – Call to Check

Lead Time

Stock Item

Model

4CHARRO

Edge Profile

Square Edges & Ends

Uncategorized

Name Description
Unfinished Red Oak Baby Threshold
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations.

This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood.
$19.50Buy Now

Unfinished Red Oak Transition Strips & Moldings

Name Description
Unfinished Red Oak Baby Threshold
94" Long and 2" Wide - This Red Oak Baby Threshold can be used where your red oak floors meet up to carpet, sliding glass door tracks, front-entry door threshold, and a variety of other situations.

This unfinished red oak Baby Threshold transition molding is sold in 8 foot long pieces. Each piece of this baby threshold is manufactured from one single piece of solid red oak hardwood.
$19.50Buy Now
Unfinished Red Oak Stair Nosing - 3/4" x 3 1/2"
3 1/2" Wide x 94" Long - This Unfinished Red Oak Stair Nosing can be used wherever your red oak flooring approaches a step down, such as the edge of a stair landing, loft, and the front of each step of your staircase.

This unfinished red oak stair nosing is made up of one single piece of solid hardwood. The stairnosing is 3/4" thick at the back where it meets up to the hardwood flooring, and the front edge is 1 1/16" thick and features a bull-nosed edge all the way across.

$38.60Buy Now
Unfinished Red Oak Quarter Round
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Quarter Round molding can be used where your red oak flooring meets your baseboard, cabinetry, or a variety of other vertical surfaces.

Each 8 foot long piece of unfinished red oak quarter round is made from a single piece of solid red oak hardwood. This is full-sized quarter round that is 3/4 inch high and 3/4 inch wide.

$6.90Buy Now
Unfinished Red Oak Cove Molding (Scotia)
3/4" x 3/4" x 94" Long - This Unfinished Red Oak Cove Molding, also called Scotia, is used where the stair riser meets the stair tread to create a complete, professional look in your wooden stair case. Cove molding is also used where treads overhang the skirt-board on the side of a staircase.

Our unfinished red oak cove molding, like all of our hardwood moldings, is made from a single piece of solid hardwood. Each piece is 3/4" Wide x 3/4" High x 8' Long.

$9.90Buy Now
Unfinished Red Oak Shoe Molding
1/2" Wide x 3/4" High x 94" Long - This Unfinished Red Oak Shoe Molding is used where your hardwood flooring meets up to wall-base, cabinetry, or any other vertical rise.

This shoe molding is made from solid red oak hardwood. Each piece is 1/2" wide x 3/4" high x 8 feet long.

Shoe Molding is very similar to Quarter Round both in it's appearance, and it's uses. The only difference is that Quarter Round is always just as wide as it is high, whereas Shoe Molding is always a little bit narrower than it is high. For example, a typical Quarter Round molding is 3/4" wide and 3/4" high. This Shoe Molding is also 3/4" high, but only 1/2" wide. Many people prefer the Shoe Molding because it is a little smaller and less invasive, while others prefer the Quarter Round molding because it is larger, and therefore is more forgiving if larger gaps are left between the flooring planks and the wall-base during installation of the floors.

$6.19Buy Now
Unfinished Red Oak Stair Nosing - 3/4" x 5 1/2"
5 1/2" Wide x 94" Long - This Unfinished Red Oak Stair Nosing can be used wherever your red oak flooring approaches a step down, such as the edge of a stair landing, loft, and the front of each step of your staircase.

This unfinished red oak stair nosing is made up of one single piece of solid hardwood. The stairnosing is 3/4" thick at the back where it meets up to the hardwood flooring, and the front edge is 1 1/16" thick and features a bull-nosed edge all the way across. This stair nosing is 5 1/2" wide.

$49.90Buy Now
Unfinished Red Oak Reducer Strip
3/4" Thick x 2 1/4" Wide x 94" Long - Use this Unfinished Red Oak Reducer Strip to transition your red oak flooring down to thin floors like vinyl, linoleum, LVT, and other types of very thin flooring materials.

All of our red oak transition strips and moldings, including this Reducer Strip, are made from solid hardwood.

This unfinished red oak reducer is 3/4" thick at it's highest point, and reduces down to approximately 1/8" at it's narrowest point. The side that is 3/4" thick features a groove that is designed to receive the groove of your hardwood flooring material, or spline that can be used to create a tongue if one is not present at the area where the Reducer is required.

$21.60Buy Now

Underlayment & Padding

Name Description
Hardwood Flooring Underlayment - Moisture Retarder Paper - $89/Roll - Free Shipping
500 SF roll of hardwood flooring underlayment. For use with all types of engineered and solid hardwood flooring for nail or staple down applications over wooden subfloors. FREE SHIPPING.
$89.00Buy Now
X
3/4″ x 4″ x 2′ – 10′ Random Length Character Red Oak
$3.29 sq. ft.